Wire and cable manufacturertwire and ctable manufacturer
Product Classification
Covered Line Wire is used primarily for 600V overhead secondary distribution lines. It is not an electrically insulated conductor and is treated as bare conductor when installed.
For overhead networks of secondary energy distribution low‐cost electricity, in urban and rural areas. Whether it's on the post or on the wall cases, with appropriate attachments. They don't need to be used insulator.
Concentric strand or compressed 1350-H19 conductor. Concentric strand AAC, ACSR or AAAC alloy neutral messenger
Concentric strand or compressed 1350-H19 conductor. Concentric strand AAC, ACSR or AAAC alloy neutral messenger
To supply 120 volt aerial service for temporary service at construction sites, as a Service Drop (power pole to service entrance), as a secondary cable (pole to pole) or street lighting. For service at 600 volts or lower at a maximum conductor temperature of 75ºC for Polyethylene insulated cables or 90ºC for Cross-Linked (XLPE) insulation
1.Conductor: Hard drawn aluminum conductors. 2.Insulation:XLPE (cross-linked polyethylene)or PE (weather resistant) 3.Insulation Color: Black 4.Application: Low voltage overhead distribution network. 5.Rated Voltage:0.6/1kV
The covered aluminum steel wire for compression, internationally known as Alumoweld or ACS, is a wire of high resistance whose cover is carried through an extrusion process, that adheres the aluminum by pressure and heat.
Copper clad steel wire (CCS) combines the high tensile strength of steel as its core and the conductivity properties of copper as its outer layer. The core material is usually low carbon steel and is typically used as either grounding wire or the inner conductor of coaxial cables.
This bare concentric-lay stranded conductor is made from round aluminum 1350-H19 (extra hard) wires and round aluminum-alloy 6201-T81 core wires for use as overhead electrical conductors. These conductors are also manufactured as compact conductors if required.
ACSR conductor has a wide range of applications, suitable for transmission lines of various voltage levels. AAC,AAAC,ACSR, ACAR conductor have been widely used in power transmission lines with various voltage levels,because they have such good characteristics as simple structure,convenient installation and maintenance,low cost large transmission capacity. And they are also suitable for laying across rivers and valleys where special geographical features exist.
This bare concentric-lay-stranded conductor, made from round aluminum alloy 6201-T81 wires, is constructed with a central core surrounded by one or more layers of helically laid wires.
AAC (All-Aluminum Conductor) is a type of electrical conductor made entirely of aluminum wires. It is mainly used in urban areas with short distances and close supports, used in overhead electric power transmission and distribution lines with various grade voltages. It mainly used as bare overhead transmission cable and as primary and secondary distribution cable. It is also suitable for laying across basins, rivers and valleys where special geographical features exist. Its characteristics are good corrosion resistance, and it can also be used near the coast.
600 V Flexible Thermoplastic Insulated Multiconductor. Each single conductor has a Thermoplastic Insulation protected with a Nylon Sheath, then the whole Multiconductor is protected by a Thermoplastic Jacket.
Copyright © Zhengzhou Zoom Link Cable Co., Ltd.
SAF Coolest v1.3.1.2 设置面板 MXXSD-ZVXR-NDXZE-AZV
无数据提示
Sorry, the current section is being updated, so stay tuned!