Product Classification
1.83kv And Below Torsion-Resistant Flexible Cables For Wind Power
The product is used for turbine in the wind power generation and fixed installation in the wind tower or similar situations at the rated voltage 1.8/3KV and below
450/750v And Below Torsion-Resistant Flexible Cables For Wind Power
It is suitable for torsion resistant cable used in wind power equipment. power connecting for electrical appliance, electrical tool movable appliance and facilities
2000V RHH/RHW-2 For Wind Turbine
For use from the lower control box at the base of the wind power tower and out to the step-up transformer through conduit.
600V SOOW Portable Cord for Wind Turbine
This portable power cord is oil, solvents, water, ozone, aging, and abrasion-resistant.used for potable tools, equipment, appliances, small motors and associated machinery in the wind turbine. It is also used for industry equipment, heavy tools, battery chargers, portable lights and power extensions.
2kV DLORHH Cables For Wind Turbine
DLO is especially suited to supply power to traction motors of diesel-electric locomotives. It is also recommended as a portable cable for drilling rigs, on-shore or off-shore, railroad and transit car wiring, electric earth-moving equipment, in shipyard applications, arc welder supply leads, power and control jumper cable, and motor leads. The cable is suitable for use in wet or dry areas, conduits, ducts, troughs or trays, and where superior electrical properties are desired. The maximum continuous conductor temperature for normal operation is 90°C in wet or dry locations. DLO resists oils, acids, alkalines, heat, flame, and has abrasion resistance.
The H1Z2Z2-K cable, which is according to IEC 62930 and EN 50618, is suitable for both fixed and mobile solar installations (solar farms, rooftop solar installations and floating plants). It is a highly flexible cable compatible with all major connectors and specially designed for the connection of photovoltaic panels. This versatile single-conductor cable is designed to meet the varying needs of the solar industry. Suitable for wet, damp and humid locations.
Widely used for electrical installation of indoor and outdoor solar energy equipment.